Web Analytics
Part Datasheet Search > 8 Bit Microcontroller > ATTINY441 Datasheet PDF
Images are for reference

ATTINY441 Datasheet PDF

Part Series:
ATTINY441 Series
Category:
8 Bit Microcontroller
Description:
MCU 8Bit ATtiny AVR CISC 4KB Flash 1.8V/2.5V/3.3V/5V 20Pin VQFN EP Tray
Updated Time: 2023/01/13 02:19:59 (UTC + 8)

ATTINY441 Datasheet PDF 8 Bit Microcontroller

20 Pages
ATMEL
MCU 8Bit ATtiny AVR RISC 4KB Flash 1.8V/2.5V/3.3V/5V 14Pin SOIC T/R
19 Pages
ATMEL
MCU 8Bit ATtiny AVR CISC 4KB Flash 1.8V/2.5V/3.3V/5V 14Pin SOIC W Tray
19 Pages
ATMEL
MCU 8Bit ATtiny AVR CISC 4KB Flash 1.8V/2.5V/3.3V/5V 20Pin VQFN EP Tray
19 Pages
ATMEL
MCU 8Bit ATtiny AVR CISC 4KB Flash 1.8V/2.5V/3.3V/5V 20Pin MLF Tray

ATTINY441-MMH - ATMEL Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Frequency
16 MHz
Number of Pins
20 Pin
Case/Package
VQFN-20
Number of Positions
20 Position
show more

ATTINY441-MMH - ATMEL Function Overview

The ATTINY441-MMH is a low-power 8-bit CMOS Microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny441 achieves throughputs approaching 1MIPS per MHz allowing the system designer to optimize power consumption versus processing speed. The AVR core combines a rich instruction set with 32 general purpose working registers. All 32 registers are directly connected to the arithmetic logic unit (ALU), allowing two independent registers to be accessed in a single instruction, executed in one clock cycle. The resulting architecture is compact and code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers. The ATtiny441 provides 4kB of in-system programmable flash, 256byte of SRAM and 256byte of EEPROM data memory.
Advanced RISC architecture
120 Powerful instructions most single clock cycle execution
32 x 8 General purpose working registers
Fully static operation
Up to 16MIPS throughput at 16MHz
One 8-bit and two 16-bit timers/counters with two PWM channels, each
Programmable ultra low power watchdog timer
Two on-chip analog comparators
Two full duplex USARTs with start frame detection
Master/Slave SPI serial interface
Slave I²C serial interface
Low power idle, ADC noise reduction, standby and power-down modes
Enhanced power-on reset circuit
Programmable brown-out detection circuit with supply voltage sampling
External and internal interrupt sources
8MHz Calibrated oscillator with temperature calibration option
32kHz Calibrated ultra low power oscillator
High-current drive capability on 2 I/O pins
0.2mA at 1.8V (1MHz System Clock) Active mode power consumption
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts