DAC121S101 Datasheet PDF

●Description

●The DAC121S101 device is a full-featured, general-purpose, 12-bit voltage-output digital-to-analog

●converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes just 177 µA of current at 3.6 V. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20-MHz

●clock rates at supply voltages in the 2.7 V to 3.6 V range.

●Features

●• DAC121S101-Q1 is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.

●• Ensured Monotonicity

●• Low Power Operation

●• Rail-to-Rail Voltage Output

●• Power-on Reset to Zero Volts Output

●• Wide Temperature Range of −40°C to +125°C

●• Wide Power Supply Range of 2.7 V to 5.5 V

●• Small Packages

●• Power Down Feature

●• Key Specifications

●– 12-Bit Resolution

●– DNL -0.15, +0.25 LSB (Typical)

●– 8-µs Output Settling Time (Typical)

●– 4-mV Zero Code Error (Typical)

●– Full-Scale Error at −0.06 %FS (Typical)

●– 0.64-mW (3.6-V) / 1.43-mW (5.5-V) Normal Mode Power Consumption (Typical)

●– 0.14-µW (3.6-V) / 0.39-µW (5.5-V) Power Down Mode (Typical)

●Applications

●• Battery-Powered Instruments

●• Digital Gain and Offset Adjustment

●• Programmable Voltage and Current Sources

●• Programmable Attenuators

●• Automotive