●Product Details
●The AD5111 provides a nonvolatile solution for 128-position adjustment applications, offering guaranteed low resistor tolerance errors of ±8% and up to ±6 mA current density in the A, B, and W pins. The low resistor tolerance, low nominal temperature coefficient, and high bandwidth simplify open-loop applications, as well as tolerance matching applications.
●The new low wiper resistance feature minimizes the wiper resistance in the extremes of the resistor array to only 45 Ω typical.
●A simple 3-wire up/down interface allows manual switching or high speed digital control with clock rates up to 50 MHz.
●The AD5111 is available in a 2 mm × 2 mm LFCSP package. The parts are guaranteed to operate over the extended industrial temperature range of −40°C to +125°C.
●APPLICATIONS
● Mechanical potentiometer replacement
● Portable electronics level adjustment
● Audio volume control
● Low resolution DAC
● LCD panel brightness and contrast control
● Programmable voltage to current conversion
● Programmable filters, delays, time constants
● Feedback resistor programmable power supply
● Sensor calibration
●### Features and Benefits
● Nominal resistor tolerance error: ±8% maximum
● Wiper current: ±6 mA
● Rheostat mode temperature coefficient: 35 ppm/°C
● Low power consumption: 2.5 μA max @ 2.7 V and 125°C
● Wide bandwidth: 4 MHz (5 kΩ option)
● Power-on EEPROM refresh time < 50 μs
● 50-year typical data retention at 125°C
● 1 million write cycles
● 2.3 V to 5.5 V supply operation
● Chip select enable multiple device operation
● Wide operating temperature:
●−40°C to +125°C
● Thin, 2 mm × 2 mm × 0.55 mm 8-lead LFCSP package
Part 3D Model
