●Product Details
●The AD5280/AD5282 are single-channel and dual-channel, 256-position, digitally controlled variable resistors (VRs)2. The devices perform the same electronic adjustment function as a potentiometer, trimmer, or variable resistor. Each VR offers a completely programmable value of resistance between the A terminal and the wiper or the B terminal and the wiper. The fixed A-to-B terminal resistance of 20 kΩ, 50 kΩ, or 200 kΩ has a 1% channel-to-channel matching tolerance. The nominal temperature coefficient of both parts is 30 parts per million/ degrees centigrade (ppm/°C). Another key feature is that the parts can operate up to +15 V or ±5 V.
●Wiper position programming defaults to midscale at system power-on. When powered, the VR wiper position is programmed by an I2C-compatible, 2-wire serial data interface. The AD5280/ AD5282 feature sleep mode programmability. This allows any level of preset in power-up and is an alternative to a costly EEPROM solution. Both parts have additional programmable logic outputs that enable users to drive digital loads, logic gates, LED drivers, and analog switches in their system.
●The AD5280/AD5282 are available in thin, surface-mounted 14-lead TSSOP and 16-lead TSSOP. All parts are guaranteed to operate over the extended industrial temperature range of −40°C to +85°C. For 3-wire SPI-compatible interface applica-tions, see the AD5260/AD5262 product information on www.analog.com.
●Applications
● Multimedia, video, and audio
● Communications
● Mechanical potentiometer replacement
● Instrumentation: gain, offset adjustment
● Programmable voltage source
● Programmable current source
● Line impedance matching
●1 Assert shutdown and program the device during power-up, then deassert the shutdown to achieve the desired preset level.
●2 The terms digital potentiometer, VR, and RDAC are used interchangeably.
●### Features and Benefits
● AD5280: 1 channel
● AD5282: 2 channels
● 256 positions
● +10 V to +15 V single supply; ±5.5 V dual-supply operation
● Fixed terminal resistance: 20 kΩ, 50 kΩ, 200 kΩ
●|
● Low temperature coefficient: 30 ppm/°C
● Power-on midscale preset1
● Programmable reset
● Operating temperature: −40°C to +85°C
● I2C-compatible interface
●---|---
Part 3D Model
