AD5334BRUZ Datasheet PDF - ADI

●The AD5334BRUZ is a quad 8-bit Digital-to-analog Converter (DAC) operates from a 2.5 to 5.5V supply, consuming just 500µA at 3V and feature a power-down mode that further reduces the current to 80nA. This device incorporates an on-chip output buffer that can drive the output to both supply rails. The AD5334 has a parallel interface. CS selects the device and data is loaded into the input registers on the rising edge of WR. The GAIN pin on the AD5334 allows the output range to be set at 0V to VREF or 0V to 2 x VREF. Input data to the DAC is double-buffered, allowing simultaneous update of multiple DACs in a system using the LDAC pin. On the AD5334 an asynchronous CLR input is also provided. This resets the contents of the Input Register and the DAC register to all zeros. This device also incorporates a power-on-reset circuit that ensures that the DAC output powers on to 0V and remains there until valid data is written to the device.

● Guaranteed monotonic by design over all codes

● Power-ON reset to 0V

● On-chip rail-to-rail output buffer amplifiers