●Product Details
●The AD5412/AD5422 are low cost, precision, fully integrated 12-/16-bit digital-to-analog converters (DAC) offering a programmable current source and programmable voltage output designed to meet the requirements of industrial process control applications.
●The output current range is programmable at 4 mA to 20 mA, 0 mA to 20 mA, or an overrange function of 0 mA to 24 mA.
●The LFCSP version of this product has a CAP2 pin so that the HART signals can be coupled onto the current output of the AD5412/AD5422.
●Voltage output is provided from a separate pin that can be configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V output ranges; an overrange of 10% is available on all ranges.
●Analog outputs are short and open-circuit protected and can drive capacitive loads of 1 μF.
●The device operates with an AVDD power supply range from 10.8 V to 40 V. Current loop compliance voltage is 0 V to AVDD − 2.5 V.
●The flexible serial interface is SPI- and MICROWIRE™-compatible and can be operated in 3-wire mode to minimize the digital isolation required in isolated applications.
●The device also includes a power-on-reset function, ensuring that the device powers up in a known state. The part also includes an asynchronous clear pin (CLEAR) that sets the outputs to zero-scale/midscale voltage output or the low end of the selected current range.
●The total output error is typically ±0.01% in current mode and ±0.01% in voltage mode.
●Applications
● Process controls
● Actuator controls
● PLC
● HART network connectivity (LFCSP package only)
●### Features and Benefits
● 16-bit resolution and monotonicity
● Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA, or 0 mA to 24 mA
● ±0.01% FSR typical total unadjusted error (TUE)
● ±3 ppm FSR/°C output drift
● Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, or ±10 V
● 10% overrange
● ±0.01% FSR typical TUE
● ±2 ppm FSR/°C output drift
● Flexible serial digital interface
● On-chip output fault detection
● On-chip reference: 10 ppm/°C maximum
● Optional regulated DVCC output
● Asynchronous clear function
● Power supply range
● AVDD: 10.8 V to 40 V
● AVSS: −26.4 V to −3 V/0 V
● Current loop compliance voltage: AVDD – 2.5 V
● Temperature range: −40°C to +105°C
● TSSOP and LFCSP packages
Part 3D Model
