●Product Details
●The AD5627R/AD5647R/AD5667R, AD5627/AD5667 members of the _nano_DAC® family are low power, dual, 12-, 14-, 16-bit buffered voltage-out DACs with/without on-chip reference. All devices operate from a single 2.7 V to 5.5 V supply, are guaranteed monotonic by design, and have an I2C-compatible serial interface.
●The AD5627R/AD5647R/AD5667R, AD5627/AD5667 have an on-chip reference. The AD5627RBCPZ, AD5647RBCPZ, and AD5667RBCPZ have a 1.25 V, 5 ppm/°C reference, giving a full-scale output range of 2.5 V; the AD5627RBRMZ and AD5667RBRMZ have a 2.5 V, 5 ppm/°C reference, giving a full-scale output range of 5 V. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. The AD5667 and AD5627 require an external reference voltage to set the output range of the DAC.
●The AD5627R/AD5647R/AD5667R, AD5627/AD5667 incorporate a power-on reset circuit that ensures the DAC output powers up to 0 V, and remains there until a valid write takes place.
●The device contains a per-channel power-down feature that reduces the current consumption of the device to 480 nA at 5 V and provides software-selectable output loads while in power-down mode. The low power consumption of this device in normal operation makes it ideally suited to portable battery-operated equipment. The on-chip precision output amplifier enables rail-to-rail output swing.
●The AD5627R/AD5647R/AD5667R, AD5627/AD5667 use a 2-wire I2C-compatible serial interface that operates in standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes.
●Applications
● Process control
● Data acquisition systems
● Portable battery-powered instruments
● Digital gain and offset adjustment
● Programmable voltage and current sources
● Programmable attenuators
●Data Sheet, Rev. 0, 1/07
●### Features and Benefits
● Low power, smallest pin-compatible, dual _nano_DACs
● AD5627R/AD5647R/AD5667R
●12-/14-/16-bit
●On-chip 1.25 V/2.5 V, 5 ppm/°C reference
● AD5627/AD5667
●12-/16-bit
●External reference only
● 3 mm x 3 mm LFCSP and 10-lead MSOP
● 2.7 V to 5.5 V power supply
● Guaranteed monotonic by design
● Power-on reset to zero scale
● Per channel power-down
● Hardware LDAC and CLR functions
● I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes
