●Product Details
●The AD5689R _nano_DAC+™ is a low power, dual, 16-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error performance. The device is available in a 3 mm × 3 mm LFCSP and a TSSOP package.
●The AD5689R also incorporates a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain there until a valid write takes place. The part contains a per channel power-down feature that reduces the current consumption of the device to 4 μA at 3 V while in power-down mode.
●The AD5689R uses a versatile serial peripheral interface (SPI) that operates at clock rates up to 50 MHz. and contains a VLOGIC pin that is intended for 1.8 V/3 V/5 V logic.
●Product Highlights
● 1. High Relative Accuracy (INL).
●AD5689R (16-bit): ±2 LSB maximum
● 2. Low Drift 2.5 V On-Chip Reference.
●2 ppm/°C typical temperature coefficient
●5 ppm/°C maximum temperature coefficient
● 3. Two Package Options.
●3 mm × 3 mm, 16-lead LFCSP
●16-lead TSSOP
●Applications
● Optical transceivers
● Base station power amplifiers
● Process control (PLC I/O cards)
● Industrial automation
● Data acquisition systems
●### Features and Benefits
● High relative accuracy (INL): ±2 LSB maximum at 16 bits
● Low drift 2.5 V reference: 2 ppm/°C typical
● Tiny package: 3 mm × 3 mm, 16-lead LFCSP
● TUE: ±0.1% of FSR maximum
● Offset error: ±1.5 mV maximum
● Gain error: ±0.1% of FSR maximum
● High drive capability: 20 mA, 0.5 V from supply rails
● See data sheet for additional features
●AD5689R-EP supports defense and aerospace applications (AQEC standard)
● Download AD5689R-EP Data Sheet (pdf)
● Temperature range: −55°C to +125°C
● Controlled manufacturing baseline
● 1 assembly/test site
● 1 fabrication site
● Enhanced product change notification
● Qualification data available on request
● V62/14634 DSCC Drawing Number
Part 3D Model
