●Product Details
●The AD5697R, a member of the nanoDAC+™ family, is a low power, dual, 12-bit buffered voltage output digital-to-analog converter (DAC). The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The AD5697R operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error performance. The device is available in a 3 mm × 3 mm LFCSP and a TSSOP package.
●The AD5697R also incorporates a power-on reset circuit and a RSTSEL pin that ensure that the DAC outputs power up to zero scale or midscale and remain there until a valid write takes place. It contains a per channel power-down feature that reduces the current consumption of the device to 4 µA at 3 V while in power-down mode.
●The AD5697R uses a versatile 2-wire serial interface that operates at clock rates up to 400 kHz and includes a VLOGIC pin intended for 1.8 V/3 V/5 V logic.
●Product Highlights
● 1. Precision DC Performance.
●TUE: ±0.1% of FSR maximum
●Offset error: ±1.5 mV maximum
●Gain error: ±0.1% of FSR maximum
● 2. Low Drift 2.5 V On-Chip Reference.
●2 ppm/°C typical temperature coefficient
●5 ppm/°C maximum temperature coefficient
● 3. Two Package Options.
●3 mm × 3 mm, 16-lead LFCSP
●16-lead TSSOP
●Applications
● Base station power amplifiers
● Process controls (programmable logic controller [PLC] I/O cards)
● Industrial automation
● Data acquisition systems
●### Features and Benefits
● Low drift 2.5 V reference: 2 ppm/°C typical
● Tiny package: 3 mm × 3 mm, 16-lead LFCSP
● Total unadjusted error (TUE): ±0.1% of full-scale range (FSR) maximum
● Offset error: ±1.5 mV maximum
● Gain error: ±0.1% of FSR maximum
● High drive capability: 20 mA, 0.5 V from supply rails
● User selectable gain of 1 or 2 (GAIN pin)
● Reset to zero scale or midscale (RSTSEL pin)
● 1.8 V logic compatibility
● Low glitch: 0.5 nV-sec
● 400 kHz I2C-compatible serial interface
● Low power: 3.3 mW at 3 V
● 2.7 V to 5.5 V power supply
● −40°C to +105°C temperature range
Part 3D Model
