AD7622BCPZ Datasheet PDF - ADI

●Product Details

●The AD7622 is a 16-bit, 2 MSPS, charge redistribution SAR, fully differential, analog-to-digital converter (ADC) that operates from a single 2.5 V power supply. The part contains a high speed, 16-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports. It features two very high sampling rate modes (wideband warp and warp) and a fast mode (normal) for asynchronous rate applications. The AD7622 is hardware factory calibrated and tested to ensure ac parameters, such as signal-to-noise ratio (SNR), in addition to the more traditional dc parameters of gain, offset, and linearity. The AD7622 is available in Pb-free only packages with operation specified from −40°C to +85°C.

●Applications

● Medical instruments

● High speed data acquisition/high dynamic data acquisition

● Digital signal processing

● Spectrum analysis

● Instrumentation

● Communications

● ATE

●### Features and Benefits

● Throughput 

●2 MSPS (wideband warp and warp mode)

●1.5 MSPS (normal mode)

● INL: ±0.5 LSB typical, ±1.5 LSB maximum

●(±23 ppm of FSR)

● 16-bit resolution with no missing codes

● Dynamic range: 92.5 dB typical

● SINAD: 91 dB minimum @ 20 kHz 

●(VREF = 2.5 V)

● THD: −115 dB typical @ 20 kHz (VREF = 2.5 V)

● 2.048 V internal reference: typical drift 8 ppm/°C; TEMP output

● Differential input range: ±VREF 

●(VREF up to 2.5 V)

● No pipeline delay (SAR architecture)

● Parallel (16-, or 8-bit bus) and serial 5 V/3.3 V/2.5 V interface

● SPI®/QSPI™/MICROWIRE™/DSP compatible

● Single 2.5 V supply operation