●Product Details
●The AD7810 is a high speed, low power, 10-bit A/D converter that operates from a single 2.7 V to 5.5 V supply. The part contains a 2 µs successive approximation A/D converter, with inherent track/hold functionality, a pseudo differential input and a high speed serial interface that interfaces to most microcontrollers. The AD7810 is fully specified over a temperature range of -40°C to +105°C.
●By using a technique that samples the state of the CONVST (convert start) signal at the end of a conversion, the AD7810 may be used in an automatic power-down mode. When used in this mode, the AD7810 automatically powers down at the end of a conversion and "wakes up" at the start of a new conversion. This feature significantly reduces the power consumption of the part at lower throughput rates. The AD7810 can also operate in a high speed mode where the part is not powered down between conversions. In this high speed mode of operation, the conversion time of the AD7810 is 2 µs. The maximum throughput rate is dependent on the speed of the serial interface of the microcontroller.
●The part is available in a small 8-pin, 0.3" wide, plastic dual-in-line package (mini-DIP); in an 8-lead, small outline IC (SOIC); and in an 8-lead microSOIC package.
●### Features and Benefits
● 10-Bit ADC with 2.3 µs Conversion Time
● Small Footprint 8-Lead microSOIC Package
● Specified Over a –40°C to +105°C Temperature Range
● Inherent Track-and-Hold Functionality
● Operating Supply Range: 2.7 V to 5.5 V
● Specifications at 2.7 V to 5.5 V
● Microcontroller-Compatible Serial Interface
● Optional Automatic Power-Down at End of Conversion
● Low Power Operation:
●270 µW at 10 kSPS Throughput Rate
●2.7 mW at 100 kSPS Throughput Rate
● Analog Input Range: 0 V to VREF
● Reference Input Range: 0 V to VDD
Part 3D Model
