●Product Details
●The AD9122 is a dual 16-bit, high dynamic range, digital-to-analog converter (DAC) that provides a sample rate of 1200 MSPS, permitting a multicarrier generation up to the Nyquist frequency. It includes features optimized for direct conversion transmit applications, including complex digital modulation, and gain and offset compensation. The DAC outputs are optimized to interface seamlessly with analog quadrature modulators, such as the ADL537x F-MOD series from Analog Devices, Inc. A 4-wire serial port interface provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a range of 8.7 mA to 31.7 mA. The AD9122 comes in a 72-lead LFCSP.
●The AD9122-EP supports defense and aerospace applications (AQEC).
●Product Highlights
● 1. Ultralow noise and intermodulation distortion (IMD) enable high quality synthesis of wideband signals from baseband to high intermediate frequencies.
● 2. A proprietary DAC output switching technique enhances dynamic performance.
● 3. The current outputs are easily configured for various single-ended or differential circuit topologies.
● 4. Flexible LVDS digital interface allows the standard 32-wire bus to be reduced to ½ or ¼ of the width.
●Applications
● Wireless infrastructure
● W-CDMA, CDMA2000, TD-SCDMA, WiMAX, GSM, LTE
● Digital high or low IF synthesis
● Transmit diversity
● Wideband communications: LMDS/MMDS, point-to-point
●### Features and Benefits
● Flexible LVDS interface allows word, byte, or nibble load
● Single-carrier W-CDMA ACLR = 82 dBc @ 122.88 MHz IF
● Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω
● Novel 2×/4×/8× interpolator/complex modulator allows carrier placement anywhere in the DAC bandwidth
● Digital gain and phase adjustment for sideband suppression
● Multiple chip synchronization interfaces
● See data sheet for additional features
●AD9122-EP supports defense and aerospace applications (AQEC standard)
● Download AD9122-EP data sheet (pdf)
● Military temperature range (such as −55°C to +105°C)
● Controlled manufacturing baseline
● One assembly/test site
● One fabrication site
● Enhanced product change notification
● Qualification data available on request
● V62/12654 DSCC Drawing Number
Part 3D Model
