●Product Details
●The AD9136 is a dual, 16-bit, high dynamic range digital-to-analog converter (DAC) that provides a maximum sample rate of 2800 MSPS, permitting a multicarrier generation over a very wide bandwidth. The DAC outputs are optimized to interface seamlessly with the ADRF6720, as well as other analog quadrature modulators (AQMs) from Analog Devices, Inc. An optional 3-wire or 4-wire serial port interface (SPI) provides for programming/readback of many internal parameters. The full-scale output current can be programmed over a typical range of 13.9 mA to 27.0 mA. The AD9136 is available in an 88-lead LFCSP.
●Product Highlights
● 1. Greater than 2 GHz, ultrawide complex signal bandwidth enables emerging wideband and multiband wireless applications.
● 2. Advanced low spurious and distortion design techniques provide high quality synthesis of wideband signals from baseband to high intermediate frequencies.
● 3. JESD204B Subclass 1 support simplifies multichip synchronization in software and hardware design.
● 4. Fewer pins for data interface width with a serializer/deserializer (SERDES) JESD204B eight-lane interface.
● 5. Programmable transmit enable function allows easy design balance between power consumption and wake-up time.
● 6. Small package size with 12 mm × 12 mm footprint.
●Applications
● Wireless communications
● 3G/4G W-CDMA base stations
● Wideband repeaters
● Software defined radios
● Wideband communications
● Point to point
● Local multipoint distribution service (LMDS) and multichannel multipoint distribution service (MMDS)
● Transmit diversity, multiple input/multiple output (MIMO)
● Instrumentation
● Automated test equipment
●### Features and Benefits
● Support input data rate >2 GSPS
● Proprietary low spurious and distortion design
● SFDR = 82 dBc at dc IF, −9 dBFS
● Flexible 8-lane JESD204B interface
● Multiple chip synchronization
● Fixed latency
● Data generator latency compensation
● Selectable 1×, 2×, 4×, or 8× interpolation filter
● Low power architecture
● Transmit enable function allows extra power saving and instant control of the output status
● High performance, low noise phase-locked loop (PLL) clock multiplier
● Digital inverse sinc filter
● Low power: 1.42 W at 1.6 GSPS full operating conditions
● 88-lead LFCSP with exposed pad
