AD9528BCPZ Datasheet PDF - ADI

●The AD9528BCPZ is a 14-output LVDS/HSTL Clock Generator for use with LTE and multicarrier GSM base stations. The first stage phase-locked loop (PLL) (PLL1) provides input reference conditioning by reducing the jitter present on a system clock. The second stage PLL (PLL2) provides high frequency clocks that achieve low integrated jitter as well as low broadband noise from the clock output drivers. The external VCXO provides the low noise reference required by PLL2 to achieve the restrictive phase noise and jitter requirements necessary to achieve acceptable performance. The integrated SYSREF generator outputs single shot, N-shot or continuous signals synchronous to the PLL1 and PLL2 outputs to time align multiple devices. Each of the 14 output channels contains a divider with coarse digital phase adjustment and an analogue fine phase delay block that allows complete flexibility in timing alignment across all 14 outputs.

● Dependent on the voltage controlled crystal oscillator (VCXO) frequency accuracy

● Dedicated 8-bit dividers on each output

● 20ps Typical output to output skew

● Duty cycle correction for odd divider settings

● Digital frequency lock detect

● SPI and I²C-compatible serial control port

● Dual PLL architecture

● Provides reference input clock clean-up with external VCXO

● Redundant reference inputs

● Automatic and manual reference switchover modes

● Revertive and non-revertive switching

● Loss of reference detection with holdover mode

● Integrated low-noise VCO