●Product Details
●The ADA4092-4 quad is a micropower, single-supply, 1.2 MHz bandwidth amplifier featuring rail-to-rail inputs and outputs. It is guaranteed to operate from a +3.0 V to +30 V single supply as well as from ±1.5 V to ±15 V dual supplies.
●The ADA4092-4 features a unique input stage that allows the input voltage to exceed either supply safely without any phase reversal or latch-up; this is called overvoltage protection (OVP).
●Applications for these amplifiers include portable telecom-munications equipment, power supply control and protection, and interface for transducers with wide output ranges. Sensors requiring a rail-to-rail input amplifier include Hall effect, piezo-electric, and resistive transducers.
●The ability to swing rail-to-rail at both the input and output enables designers, for example, to build multistage filters in single-supply systems and to maintain high signal-to-noise ratios (SNR).
●The ADA4092-4 is specified over the extended industrial temperature range of −40°C to +125°C. The ADA4092-4 is part of the growing selection of 36 V, low power op amps from Analog Devices, Inc. (See Table 1 in data sheet).
●The ADA4092-4 is available in the 14–lead TSSOP surface-mount package.
●Applications
● Industrial process control
● Battery-powered instrumentation
● Power supply control and protection
● Telecommunications
● Remote sensors
● Low voltage strain gage amplifiers
● DAC output amplifiers
●### Features and Benefits
● Single-supply operation: 3.0 V to 30 V
● Wide input voltage range
● Rail-to-rail output swing
● Low supply current: 200 μA/amplifier
● Wide bandwidth: 1.4 MHz
● High phase margin: 69°
● Slew rate: 0.4 V/μs
● Low offset voltage: 1.50 mV maximum
● No phase reversal
● Overvoltage protection (OVP)
●25 V above/below supply rails at ±5 V
●12 V above/below supply rails at ±15 V