ADG5208BRUZ Datasheet PDF - ADI

●The ADG5208 series monolithic CMOS Analog Multiplexer comprising eight single channels. The ADG5208 switches one of eight inputs to a common output, as determined by the 3-bit binary address lines, A0, A1 and A2. An EN input on both devices enables or disables the device and when EN is disabled, all channels switch off. The ultralow capacitance and charge injection of these switches make them ideal solutions for data acquisition and sample-and-hold applications, where low glitch and fast settling are required. Fast switching speed coupled with high signal bandwidth make these devices suitable for video signal switching. Each switch conducts equally well in both directions when on and each switch has an input signal range that extends to the power supplies. In the off condition, signal levels up to the supplies are blocked. The device does not have VL pins, instead, the logic power supply is generated internally by an on-chip voltage generator.

● VSS to VDD Analog signal range

● Latch-up proof

● 2.9pF OFF source capacitance

● 34pF OFF drain capacitance

● 0.2pC (typical) Charge injection

● 160R (typical) Low ON resistance

● Fully specified at ±15V, ±20V, +12V and +36V

● HBM ESD rating - 8kV I/O port to supplies, 2kV I/O port to I/O port, 8kV all other pins