ADM483EARZ-REEL Datasheet PDF - ADI

●The ADM483EARZ-REEL is a Low Power RS-485 Data Transceiver with ±15kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up to 32 transceivers on a bus. It has a low current shutdown mode in which it consumes only 0.1µA. Because only one driver is enabled at any time, the output of a disabled or power-down driver is three-stated to avoid overloading the bus. Drivers are short-circuit current-limited and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if the input is open circuit.

● ±15kV ESD protection

● 250kbps Data rate

● Reduced slew rate for low EM interference

● -7 to +12V Bus common-mode range

● Up to 32 nodes on the bus

● Receiver has open-circuit, fail-safe design

● Short-circuit protection

● 36µA Supply current

● 0.1µA Shutdown current

●ESD sensitive device, take proper precaution while handling the device.