●Product Details
●The ADP5053 combines four high performance buck regulators, a supervisory circuit, a watchdog timer, and a manual reset in a 48-lead LFCSP package that meets demanding performance and board space requirements. The device enables direct connection to high input voltages up to 15.0 V with no preregulators.
●Channel 1 and Channel 2 integrate high-side power MOSFET and low-side MOSFET drivers. External NFETs can be used in low-side power devices to achieve an efficiency optimized solution and deliver a programmable output current of 1.2 A, 2.5 A, or 4 A. Combining Channel 1 and Channel 2 in a parallel configuration can provide a single output with up to 8 A of current.
●Channel 3 and Channel 4 integrate both high-side and low-side MOSFETs to deliver an output current of 1.2 A.
●The switching frequency of the ADP5053 can be programmed or synchronized to an external clock. The ADP5053 contains a precision enable pin on each channel for easy power-up sequencing or adjustable UVLO threshold.
●The ADP5053 contains supervisory circuits that monitor the voltage level. The watchdog timer can generate a reset if the WDI pin is not toggled within a preset timeout period. Processor reset mode or system power on/off switch mode can be selected for manual reset functionality.
●Applications
● Small cell base stations
● FPGA and processor applications
● Security and surveillance
● Medical applications
●### Features and Benefits
● Wide input voltage range: 4.5 V to 15.0 V
● ±1.5% output accuracy over full temperature range
● 250 kHz to 1.4 MHz adjustable switching frequency
● Adjustable/fixed output options via factory fuse
● Power regulation
● Channel 1 and Channel 2: programmable 1.2 A/2.5 A/4 A sync buck regulators with low-side FET driver
● Channel 3 and Channel 4: 1.2 A sync buck regulators
● Single 8 A output (Channel 1 and Channel 2 operated in parallel)
● Precision enable with 0.8 V accurate threshold
● Active output discharge switch
● FPWM or automatic PWM/PSM selection
● Frequency synchronization input or output
● Optional latch-off protection on OVP/OCP failure
● Power-good flag on selected channels
● UVLO, OCP, and TSD protection
● Open-drain processor reset with external adjustable threshold monitoring
● Watchdog refresh input
● Manual reset input
