ADR530BRTZ-REEL7 Datasheet PDF - ADI

●The ADR530 series high-precision shunt-mode Voltage Reference features low temperature drift of 40ppm/°C, an initial accuracy of better than ±0.2% and ultralow output noise of 18µV p-p. Available in output voltages of 3V, the advanced design of the ADR530 eliminates the need for compensation by an external capacitor, yet the references are stable with any capacitive load. The minimum operating current increases from a mere 50µA to a maximum of 15mA. This low operating current and ease of use make these references ideally suited for handheld, battery-powered applications. A trim terminal is available on the ADR530 to allow adjustment of the output voltage over a ±0.5% range, without affecting the temperature coefficient of the device. This feature provides users with the flexibility to trim out small system errors.

● No external capacitor required

● 2x Temperature coefficient improvement over the LM4040

● Pin compatible with the LM4040/LM4050

● ±0.2% Initial accuracy

● 18µVp-p at 2.5V Low output voltage noise