●The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments.
●The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters.
●The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains.
●The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration.
●The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source.
●Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from –40°C to +85°C, with a maximum operating range to +125°C.
● High Resolution:
●130-dB SNR (250 SPS)
● High Accuracy:
●THD: –122 dB
●INL: 0.5 ppm
● Low-Noise PGA
● Two-Channel Input Mux
● Inherently-Stable Modulator with Fast Responding
●Overrange Detection
● Flexible Digital Filter:
●Sinc + FIR + IIR (Selectable)
●Linear or Minimum Phase Response
●Programmable High-Pass Filter
●Selectable FIR Data Rates: 250 SPS
●to 4 kSPS
● Filter Bypass Option
● Low Power Consumption: 25 mW
●Shutdown: 10 µW
● Offset and Gain Calibration Engine
● SYNC Input
● Analog Supply:
●Unipolar (+5 V) or Bipolar (±2.5 V)
● Digital Supply: 1.8 V to 3.3 V
