ADS1293CISQE/NOPB Datasheet PDF - TI

●The ADS1293CISQE/NOPB is a 24-bit 3-channel low-power Analogue Front End for bio potential measurements. The ADS1293 enables the creation of scalable medical instrumentation systems at significantly reduced size and power. The analogue front end features 3 high-resolution channels capable of operating up to 25.6kSPS. Each channel can be independently programmed for a specific sample rate and bandwidth allowing users to optimize the configuration for performance and power. All input pins incorporate an EMI filter and can be routed to any channel through a flexible routing switch. Flexible routing also allows independent lead-off detection, right-leg drive and Wilson/Goldberger reference terminal generation without need to reconnect leads externally. A fourth channel allows external analogue pace detection for applications that do not use digital pace detection. This device incorporates a self-diagnostics alarm system to detect when the system is out of the operating conditions range.

● Three high-resolution digital ECG channels with simultaneous pace output

● EMI-hardened inputs

● 0.3mW/channel Low power

● 7µVpp Input-referred noise

● 175pA Input bias current

● Right-leg drive amplifier

● AC and DC Lead-off detection

● Wilson and Goldberger Terminals

● ALARMB Pin for interrupt driven diagnostics

● Battery voltage monitoring

● Built-in oscillator and reference

● Flexible power-down and standby modes

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.