ADT7410TRZ Datasheet PDF - ADI

●The ADT7410TRZ is a High Accuracy Digital I²C Temperature Sensor that contains a band gap temperature reference and a 13-bit ADC to monitor and digitize the temperature to a 0.0625°C resolution. The ADC resolution by default is set to 13-bit (0.0625°C). This can be changed to 16-bit (0.0078°C) by setting Bit 7 in the configuration register (Register Address 0x03). The ADT7410 has a shutdown mode that powers down the device and offers a shutdown current of typically 2µA. Pin A0 and Pin A1 are available for address selection, giving the ADT7410 four possible I²C® addresses. The CT pin is an open-drain output that becomes active when the temperature exceeds a programmable critical temperature limit. The default critical temperature limit is 147°C. The INT pin is also an open-drain output that becomes active when the temperature exceeds a programmable limit. The INT and CT pins can operate in either comparator or interrupt mode.

● High performance

● 16-bit Temperature resolution (0.0078°C)

● Easy implementation

● Low power

● 700µW Typical power (at 3.3V in normal mode)

● 7µW Typical power (at 3.3V in shutdown mode)

● Critical over-temperature interrupt

● Over-temperature/under-temperature interrupt

● I²C-compatible interface

●ESD sensitive device, take proper precaution while handling the device.