ADUCM360BCPZ128 Datasheet PDF - ADI

●The ADUCM360BCPZ128 is a fully integrated, 3.9 kSPS 32-bit Precision Analog Microcontroller incorporates dual high performance, multichannel sigma-delta (Σ-Δ) (Σ-Δ) ADCs, a 32-bit ARM Cortex™-M3 processor and flash/EE memory on a single chip. The ADuCM360 contain an on-chip 32kHz oscillator and an internal 16MHz high frequency oscillator. The high frequency oscillator is routed through a programmable clock divider from which the operating frequency of the processor core clock is generated. The maximum core clock speed is 16MHz; this speed is not limited by operating voltage or temperature. The microcontroller core is a low power ARM Cortex-M3 processor, a 32-bit RISC machine that offers up to 20MIPS peak performance. The Cortex-M3 processor incorporates a flexible, 11-channel DMA controller that supports all wired communication peripherals (SPI, UART and I²C). Also integrated on chip are 128kB of nonvolatile Flash/EE memory and 8kB of SRAM.

● Dual 24-bit ADCs

● Programmable ADC output rate (3.5Hz to 3.906kHz)

● Simultaneous 50Hz/60Hz noise rejection

● Flexible input mux for input channel selection to both ADCs

● Programmable sensor excitation current sources

● On-chip precision voltage reference

● Single 12-bit voltage output DAC

● Serial wire download and debug

● Internal watch crystal for wake-up timer

● 16MHz Oscillator with 8-way programmable divider

● In-circuit debug/download via serial wire and UART

● Overall system current consumption of 1.0mA with core

● 16-bit PWM controller

● 19-pin Multifunction GPIO port

● 2 General-purpose timers

● Wake-up timer/watchdog timer

● Multichannel DMA and interrupt controller