●Product Details
●The ADuM5401/ADuM5402/ADuM5403/ADuM5404 devices are quad-channel digital isolators with isoPower®, an integrated, isolated dc-to-dc converter. Based on the Analog Devices, Inc., _i_Coupler® technology, the dc-to-dc converter provides up to 500 mW of regulated, isolated power at either 5.0 V from a 5.0 V input supply or 3.3 V from a 3.3 V supply. This eliminates the need for a separate, isolated dc-to-dc converter in low power, isolated designs. The _i_Coupler chip scale transformer technology is used to isolate both the logic signals and the magnetic components of the dc-to-dc converter. The result is a small form factor, total isolation solution.
●The ADuM5401/ADuM5402/ADuM5403/ADuM5404 isolators provide four independent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide for more information).
●_iso_Power uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. Refer to Application Note AN-0971 for details on board layout considerations.
●Applications
● RS-232/RS-422/RS-485 transceivers
● Industrial field bus isolation
● Power supply startup bias and gate drives
● Isolated sensor interfaces
● Industrial PLCs
●### Features and Benefits
● For AEC-Q100 Automotive Qualified Devices Specifications. Please View ADuM540xW Datasheet.
● isoPower integrated, isolated dc-to-dc converter
● Regulated 3.3 V or 5.0 V output
● Up to 500 mW output power
● Quad dc-to-25 Mbps (NRZ) signal isolation channels
● Schmitt trigger inputs
● 16-lead SOIC package with >8.0 mm creepage
● High temperature operation: 105°C
● See Data Sheet for Additional Information
● SAFETY & REGULATORY COMPLIANCE
Part 3D Model
