ADXL320JCP Datasheet PDF - ADI

●The ADXL320JCP is an iMEMS® Complete Dual-axis Accelerometer with signal conditioned voltage outputs, which is all on a single monolithic IC. The product measures acceleration with a full-scale range of ±5g (typical). It can also measure both dynamic acceleration (vibration) and static acceleration (gravity). The ADXL320"s typical noise floor is 250µg/√Hz, allowing signals below 2mg to be resolved in tilt-sensing applications using narrow bandwidths (<60Hz). The user selects the bandwidth of the accelerometer using capacitors CX and CY at the XOUT and YOUT pins. Bandwidths of 0.5Hz to 2.5kHz may be selected to suit the application.

● Small and thin

● 2mg Resolution at 60Hz

● Low power (350µA at VS = 2.4V (typical))

● Good zero g bias stability

● Good sensitivity accuracy

● X-axis and Y-axis aligned to within 0.1° (typical)

● BW adjustment with a single capacitor

● Single-supply operation

● 10,000g Shock survival

●ESD sensitive device, take proper precaution while handling the device.