AM26LV32EIRGYR Datasheet PDF - TI

●The AM26LV32EIRGYR is a quadruple differential Line Receiver with 3-state outputs. This device is designed to meet TIA/EIA-422-B and ITU recommendation V.11 driver with reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32MHz. The 3-state outputs permit connection directly to a bus-organized system. It has an internal fail-safe circuitry that prevents the device from putting an unknown voltage signal at the receiver outputs. In the open fail-safe, shorted fail-safe and terminated fail-safe, a high state is produced at the respective output. This device is supported for partial-power-down applications using IOFF. IOFF circuitry disables the outputs, preventing damaging current back-flow-through the device when it is powered down.

● ESD protection for RS422 bus pins

● Open circuit, short-circuit and terminated failsafe

● Accepts 5V logic inputs with 3.3V supply (enable inputs)

● Pin-to-Pin-compatible with AM26C32 and AM26LS32

● IOFF supports partial-power-down mode operation

● 27mW Typical low power dissipation

● ±7V Common-mode input voltage range

● ±200mV Sensitivity

● 35mV Typical input hysteresis

● Green product and no Sb/Br