AM26LV32IDR Datasheet PDF - TI

●The AM26LV32IDR is a quadruple low-voltage high-speed differential Line Receiver with 3-state outputs. It is designed to be similar to TIA/EIA-422-B and ITU recommendation V.11 receiver with reduced common-mode voltage range due to reduced supply voltage. The device is optimized for balanced bus transmission at switching rate up to 32MHz. The enable function is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit connection directly to a bus-organized system. Each device features receiver high input impedance and input hysteresis for increased noise immunity and input sensitivity of ±200mV over a common-mode input voltage range from -0.3 to 5.5V. When the inputs are open circuited, the outputs are in the high logic state. This device is designed using the Texas Instruments (TI™) proprietary LinIMPACT-C60™ technology, facilitating ultra-low power consumption without sacrificing speed.

● Open-circuit, short-circuit and terminated failsafe

● Pin-to-Pin-compatible with AM26C32, AM26LS32 and MB570

● Accepts 5V logic inputs with 3.3V VCC

● 27mW Typical low power dissipation

● -0.3 to 5.5V Common-mode range

● ±200mV Sensitivity

● 50mV Typical input hysteresis

● 235mW with four receivers at 32MHz

● Green product and no Sb/Br