●The AMIS-30522 is a micro-stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and a SPI interface with an external microcontroller. It has an on-chip voltage regulator, reset-output and watchdog reset, able to supply peripheral devices. AMIS-30522 contains a current-translation table and takes the next micro-step depending on the clock signal on the NXT input pin and the status of the DIR (direction) register or input pin. The chip provides a speed and load angle output. This allows the creation of stall detection algorithms and control loops based on load-angle to adjust torque and speed. It uses a proprietary PWM algorithm for reliable current control. The AMIS-30522 is implemented in I2T100 technology, enabling both high-voltage analog circuitry and digital functionality on the same chip. The chip is fully compatible with the automotive voltage requirements. The AMIS-30522 is ideally suited for general-purpose stepper motor applications in the automotive, industrial, medical, and marine environment. With the on-chip voltage regulator it further reduces the BOM for mechatronic stepper applications.
●Features | | Benefits
●---|---|---
● | | | | |
● Integrated 5V regulator
●| |
● Supplies external microcontroller
● Integrated reset function
●| |
● Reset external microcontroller
● On-chip current translator
●| |
● SPI interface
●| |
● Speed and load angle output
●| |
● Seven step modes from full step up to 32 micro-steps
●| |
● Fully integrated current-sense
●| |
● PWM current control with automatic selection of fast and slow decay
●| |
● Low EMC PWM with selectable voltage slopes
●| |
● Active fly-back diodes
●| |
● Full output protection and diagnosis
●| |
● Thermal warning and shutdown
●| |
● Compatible with 5V and 3.3V microcontrollers
●| |
● Dual H-Bridge for 2-phase stepper motors
●| |
● Programmable peak-current up to 1.6A using a 5-bit current DAC
●| |
● Integrated watchdog function
●| |
● Flap/valve control in climate control facilities
●| |
