●Description
●The AT89C4051 is a low-voltage, high-performance CMOS 8-bit microcontroller with 4K bytes of Flash programmable and erasable read-only memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C4051 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to many embedded control applications.
●The AT89C4051 provides the following standard features: 4K bytes of Flash, 128 bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five-vector, two-level interrupt architecture, a full duplex serial port, a precision analog comparator, on-chip oscillator and clock circuitry. In addition, the AT89C4051 is designed with static logic for operation down to zero frequency and supports two software-selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The power-down mode saves the RAM contents but freezes the oscillator disabling all other chip functions until the next hardware reset.
●Features
●• Compatible with MCS®51 Products
●• 4K Bytes of Reprogrammable Flash Memory
● – Endurance: 1,000 Write/Erase Cycles
●• 2.7V to 6V Operating Range
●• Fully Static Operation: 0 Hz to 24 MHz
●• Two-level Program Memory Lock
●• 128 x 8-bit Internal RAM
●• 15 Programmable I/O Lines
●• Two 16-bit Timer/Counters
●• Six Interrupt Sources
●• Programmable Serial UART Channel
●• Direct LED Drive Outputs
●• On-chip Analog Comparator
●• Low-power Idle and Power-down Modes
●• Brown-out Detection
●• Power-On Reset (POR)
●• Green (Pb/Halide-free/RoHS Compliant) Packaging
