ATMEGA1280-16AU Datasheet PDF - ATMEL

●The ATMEGA1280-16AU is a high-performance, low-power 8-bit AVR RISC-based Microcontroller combines 4kb EEPROM, 86 general purpose I/O lines, 32 general purpose working registers, real time counter, six flexible timer/counters with compare modes, PWM, 4 USARTs, byte oriented 2-wire serial interface, 16-channel 10-bit A/D converter and a JTAG interface for on-chip debugging. The device achieves a throughput of 16 MIPS at 16MHz and operates between 2.7 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves a throughput approaching 1 MIPS per MHz, balancing power consumption and processing speed.

● High-performance, Low-power AVR® 8-Bit Microcontroller

● Advanced RISC Architecture

● High Endurance Non-volatile Memory Segments

● Atmel® QTouch® Library Support

● JTAG (IEEE® Standard 1149.1 Compliant) Interface

● Power-on Reset and Programmable Brown-out Detection

● Internal Calibrated Oscillator

● External and Internal Interrupt Sources

● Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby Sleep Modes

● 1MHz, 1.8V, 500µA Active Mode and 0.1µA at 1.8V Power-down Mode Ultra-low Power Consumption

● 0 to 16MHz at 4.5 to 5.5V Speed Grade