●Description
●The ATtiny15L is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny15L achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
●The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
●Features
●• High-performance, Low-power AVR® 8-bit Microcontroller
●• Advanced RISC Architecture
● – 90 Powerful Instructions – Most Single Clock Cycle Execution
● – 32 x 8 General Purpose Working Registers
● – Fully Static Operation
●• Non-volatile Program and Data Memories
● – 1K Byte In-System Programmable Flash Program Memory Endurance: 1,000 Write/Erase Cycles
● – 64 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles
● – Programming Lock for Flash Program Data Security
●• Peripheral Features
● – Interrupt and Wake-up on Pin Change
● – Two 8-bit Timer/Counters with Separate Prescalers
● – One 150 kHz, 8-bit High-speed PWM Output
● – 4-channel 10-bit ADC One Differential Voltage Input with Optional Gain of 20x
● – On-chip Analog Comparator
● – Programmable Watchdog Timer with On-chip Oscillator
●• Special Microcontroller Features
● – In-System Programmable via SPI Port
● – Enhanced Power-on Reset Circuit
● – Programmable Brown-out Detection Circuit
● – Internal, Calibrated 1.6 MHz Tunable Oscillator
● – Internal 25.6 MHz Clock Generator for Timer/Counter
● – External and Internal Interrupt Sources
● – Low-power Idle and Power-down Modes
●• Power Consumption at 1.6 MHz, 3V, 25°C
● – Active: 3.0 mA
● – Idle Mode: 1.0 mA
● – Power-down: < 1 µA
●• I/O and Packages
● – 8-lead PDIP and 8-lead SOIC: 6 Programmable I/O Lines
●• Operating Voltages
● – 2.7V - 5.5V
●• Internal 1.6 MHz System Clock
Part 3D Model
