●The BlueNRG-1 is a very low power Bluetooth low energy (BLE) single-mode system-on-chip, compliant with Bluetooth specification.
●The BlueNRG-1 extends the features of award-winning BlueNRG network processor, enabling the usage of the embedded Cortex M0 for running the user application code.
●The BlueNRG-1 includes 160 KB of programming Flash memory, 24 KB of static RAM memory with retention (two 12 KB banks) and SPI, UART, I²C standard communication interface peripherals. It also features multifunction timers, watchdog, RTC and DMA controller.
●An ADC is available for interfacing with analog sensors, and for reading the measurement of the integrated battery monitor. A digital filter is available for processing a PDM stream.
●The BlueNRG-1 offers the same excellent RF performance of the BlueNRG radio, and the integrated high efficiency DC/DC converter keeps the same ultra-low power characteristics, but the BlueNRG-1 improves the BlueNRG sleep mode current consumption allowing a further increase in the battery lifetime of the applications.
●Key Features
● Bluetooth specification compliant master, slave and multiple roles simultaneously, single-mode Bluetooth low energy system-on-chip
● Operating supply voltage: from 1.7 to 3.6 V
● Integrated linear regulator and DC-DC step-down converter
● Operating temperature range: -40 °C to 105 °C
● High performance, ultra-low power Cortex-M0 32-bit based architecture core
● Programmable 160 KB Flash
● 24 KB RAM with retention (two 12 KB banks)
● 1 x UART interface
● 1 x SPI interface
● 2 x I²C interface
● 14 or 15 GPIO
● 2 x multifunction timer
● 10-bit ADC
● Watchdog & RTC
● DMA controller
● PDM stream processor
● 16 or 32 MHz crystal oscillator
● 32 kHz crystal oscillator
● 32 kHz ring oscillator
● Battery voltage monitor and temperature sensor
● Up to +8 dBm available output power (at antenna connector)
● Excellent RF link budget (up to 96 dB)
● Accurate RSSI to allow power control
● 8.3 mA TX current (@ -2 dBm, 3.0 V)
● Down to 1 µA current consumption with active BLE stack (sleep mode)
● Suitable for building applications compliant with the following radio frequency regulations: ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15, ARIB STD-T66
● Pre-programmed bootloader via UART
● QFN32, WCSP34 package option
● Dedicated wettable flank QFN package for automotive grade qualification
Part 3D Model
