BQ2057SN Datasheet PDF - TI

●The BQ2057SN is an advance linear charge management Integrated Circuit for single and two cell lithium ion and lithium polymer. This IC combines high-accuracy current and voltage regulation, battery conditioning, temperature monitoring, charge termination, charge-status indication and AutoComp charge-rate. The BQ2057 continuously measures battery temperature using an external thermistor. For safety, the IC inhibits charge until the battery temperature is within user-defined thresholds. The IC then charges the battery in three phases conditioning, constant current and constant voltage. If the battery voltage is below the low-voltage threshold V(min), the IC pre-charges using a low current to condition the battery. The conditioning charge rate is approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external pass-element during the initial stage of the charge. After conditioning, the IC applies a constant current to the battery.

● Requires small number of external components

● Better than ±1% voltage regulation accuracy with pre-set voltages

● AutoComp™ Dynamic compensation of battery pack"s internal impedance to reduce charge time

● Optional cell-temperature monitoring before and during charge

● Integrated voltage and current regulation with programmable charge-current

● Integrated cell conditioning for reviving deeply discharged cells

● Charge status output for single or dual led or host processor interface

● Automatic battery-recharge feature

● Charge termination by minimum current

● Automatic low-power sleep mode when VCC is removed

● EVMs Available for quick evaluation

● Green product and no Sb/Br