BQ76925PW Datasheet PDF - TI

●The BQ76925PW is a host-controlled Analog Front End IC for 3-, 4-, 5-, or 6-series cell Li-ion and Li-polymer batteries. It allows a host controller to monitor individual cell voltages, pack current and temperature easily. The Host may use this information to determine unsafe or faulty operating conditions such as overvoltage, under- voltage, over temperature, overcurrent, cell imbalance, state of charge and state of health conditions. Cell input voltages are level-shifted, multiplexed, scaled and output for measurement by a Host ADC. A dedicated pin provides a low-drift calibrated reference voltage to enable accurate measurements. The voltage across an external-sense resistor is amplified and output to a Host ADC for both charge and discharge current measurements. Two gain settings enable operation with a variety of sense resistor values over a wide range of pack currents.

● Analog interface for host cell measurement

● Switchable thermistor bias output for host temperature measurements

● Overcurrent comparator with dynamically adjustable threshold

● Alerts host to potential overcurrent faults

● Wakes up host on load connect

● Integrated cell balancing FETs

● Individual host control

● 50mA Per cell balancing current

● Supports cell sense-line open wire detection

● Low power consumption

● Green product and no Sb/Br

●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.