BR93LC46 Datasheet PDF - ROHM Semiconductor

●• Overview

●The BR93LC46 series are CMOS serial input / output-type memory circuits (EEPROMs) that can be programmed electrically. Each is configured of 64 words × 16 bits (1,024 bits), and each word can be accessed individually and data read from it and written to it. Operation control is performed using five types of commands. The commands, addresses, and data are input through the DI pin under the control of the CS and SK pins. In a write operation, the internal status signal (READY or BUSY) can be output from the DO pin.

●• Features

●• Low power CMOS Technology

●• 64 × 16bit configuration

●• 2.7V to 5.5V operation

●• Low power dissipation

●   – 3mA (max.) active current: 5V

●   – 5µA (max.) standby current: 5V

●• Auto increment for efficient data dump

●• Automatic erase-before-write

●• Hardware and software write protection

●   – Default to write-disabled state at power up

●   – Software instructions for write-enable / disable

●   – Vcc lockout inadvertent write protection

●• 8-pin SOP / 8-pin SSOP-B / 8-pin DIP packages

●• Device status signal during write cycle

●• TTL-compatible Input / Output

●• 100,000 ERASE / write cycles

●• 10 years Data Retention