C317C220J2G5TA Datasheet PDF - KEMET Corporation

●The C317C220J2G5TA is a Goldmax conformally-coated radial leaded Multilayer Ceramic Capacitor with 100% matte Sn-plated lead finish, C0G (NP0) dielectric. The basic capacitor element is similar for all styles. It is called a chip and consists of formulated dielectric materials which have been cast into thin layers, interspersed with metal electrodes alternately exposed on opposite edges of the laminated structure. The entire structure is fired at high temperature to produce a monolithic block which provides high capacitance values in a small physical volume. After firing, conductive terminations are applied to opposite ends of the chip to make contact with the exposed electrodes. Termination materials and methods vary depending on the intended use.

● 100MR Insulation resistance

● 200% of rated voltage at +25°C Life test

● 0.10% Maximum Dissipation factor

● 100% matte tin (Sn) and nickel (Ni) plating with steel core

● Dimension is 3.81mm x 5.84mm (L x H)

● 5.08mm pitch spacing

● Epoxy encapsulated

● Temperature coefficient is 0 ±30ppm/°C

● Operating temperature range from -55°C to 125°C