●The C8051F061-GQ is a highly integrated mixed-signal high-speed pipelined 8-bit ISP Flash Microcontroller featuring 8051-compatible CIP-51 core, 64kB of in-system programmable flash memory, 4352 (4096 + 256) byte of on-chip RAM, two separate 16-bit high speed (SAR) ADCs. Each ADC operates up to 1Msps; the highest resolution SAR ADC that has ever been integrated onto a microcontroller. In addition these devices include a 10-bit ADC and two separate 12-bit DACs. With on-chip VDD monitor, watchdog timer and clock oscillator, the C8051F06x family of devices are truly stand-alone system-on-a-chip solutions. All analog and digital peripherals are enabled/disabled and configured by user firmware. The flash memory can be reprogrammed even in-circuit, providing non-volatile data storage and also allowing field upgrades of the 8051 firmware.
● High-speed 8051 µC Core
● Pipelined instruction architecture - Executes 70% of instruction set in 1 or 2 system clocks
● Up to 25MIPS throughput with 25MHz clock
● Flexible interrupt sources
● Three Analog comparators
● Voltage reference
● Precision VDD Monitor/Brown-out detector
● On-chip debug circuitry facilitates full-speed, nonintrusive In-circuit/In-system debugging
● Provides breakpoints, single-stepping, watchpoints, stack monitor
● Inspect/Modify memory and registers
● Superior performance to emulation systems using ICEChips, target pods and sockets
● IEEE1149.1 compliant boundary scan
● Bosch controller area network (CAN 2.0B), hardware SMBus™, SPI™ and two UART serial ports
● Hardware SMBus™, SPI™ and two UART serial ports available concurrently
● Programmable 16-bit counter/timer array with 6 capture/compare modules
● 5 General purpose 16-bit counter/timers
● Dedicated watch-dog timer; Bi-directional reset pin
● Internal calibrated precision oscillator: 24.5MHz
● External oscillator - Crystal, RC, C or clock
● Multiple power saving sleep and shutdown modes
