CAT5241WI00 Datasheet PDF - ON Semiconductor

●DESCRIPTION

●The CAT5241 is four Digitally Programmable Potentiometers (DPPs™) integrated with control logic

●and 16 bytes of NVRAM memory. Each DPP consists of a series of 63 resistive elements connected

●between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. A separate

●FEATURES

●Four linear-taper digitally programmable potentiometers

●64 resistor taps per potentiometer

●End to end resistance 2.5 kΩ, 10 kΩ, 50 kΩ or 100 kΩ

●Potentiometer control and memory access via I²C interface

●Low wiper resistance, typically 80 Ω

●Nonvolatile memory storage for up to four wiper settings for each potentiometer

●Automatic recall of saved wiper settings at power up

●2.5 to 6.0 volt operation

●Standby current less than 1 µA

●1,000,000 nonvolatile WRITE cycles

●100 year nonvolatile memory data retention

●20-lead SOIC and TSSOP packages

●Industrial temperature range