●Overview
●CBTL08GP053 is an USB Type-C High Performance Crossbar Switch IC meant to be used for Type-C connector interface high speed passive switching applications. It provides switching of high speed differential signals that correspond to various interface standards: USB3.1 (10 Gbps), DP1.3 (8.1 Gbps), PCI Express 3.0 (8 Gbps), etc. It supports switching of single ended signals over Type-C interface. In addition, side band switching of AUX and other dedicated signals for transport over SBU1 and SBU2.
●It provides the I²C-bus interface for switch control, configuration and status update. It operates from a single platform power supply VDD.
●This IC is targeted for a wide range of platforms (PCs, Tablets, Convertibles, Smart phones) and PC Accessories (e.g. Docks, Monitors, etc.) applications.
●CBTL08GP053 is available in a small footprint package option: VFBGA40 4.75 mm x 3.25 mm, 0.5 mm pitch.
●MoreLess
●## Features
●### High speed switch features
● Supports the following interface standards: USB3.1, DP1.3, DP++, PCIe 3.0
● Supports signaling rates up to 10 Gbps
● Performs Multiplexing or Switching of High speed differential signals or Single ended signals
● All switches are direction agnostic
● Design based on both Patented and Patent pending High performance Switch technology
● Target performance specification
● Differential signaling (peak to peak) of 1.4 V and common mode level over 0 V to 2.2 V
● 1.8 V single ended rail to rail signaling
● Ron: 7 Ω (typ)
● Insertion loss: 1.2 dB at 2.7 GHz, 1.8 dB at 5.4 GHz, 3 dB at 8.5 GHz (typ)
● Isolation: 23 dB at 2.7 GHz, 16.5 dB at 5.4 GHz (typ)
● Cross talk: 32 dB at 2.7 GHz, 24 dB at 5.4 GHz (typ)
● Return loss: 20 dB at 2.7 GHz, 16 dB at 5.4 GHz (typ)
● Very low intra pair skew
● Very low propagation delay (80 ps typical) and inter pair skew (35 ps typical)
● Switch paths selectable through the I2C-bus interface (registers for atomic and sequential switch selection)
●### Sideband auxiliary crossbar switch features
● Single ended 2:1 multiplexing/switching with single ended cross bar switching of both differential AUX or single ended UART or I²C or miscellaneous signals
● Switches are direction agnostic
● Switches are 5.5 V tolerant
● Target performance specification (typical values)
● Ron 8 Ω (typ) at Vcm = 0.5 V to 2.65 V
● Very low propagation delay (80 ps typical)
● Switch paths selectable through the I²C-bus interface (registers for atomic and sequential switch selection)
●### General
● Supports I²C slave interface Standard mode (100 kbit/s) and Fast mode (400 kbit/s)
● I²C Slave address programmable up to 4 values
● Back current protection on Control pins and exposed connector side I/O pins
● Single 3.3 V power supply
● Current consumption
● Active mode (all switches are functional): 300 μA (typ)
● Standby mode (all switches in Hi-Z): 15 μA (max)
● Operating temperature: -40 °C to 105 °C
● ESD 2 kV HBM, 500 V CDM
● Package: VFBGA40 4.75 mm x 3.25 mm, 0.5 mm pitch
●## Target Applications
● PC platforms: Notebook PCs, Desktop PCs, Ultrabooks
● Tablets, 2:1 Convertibles, Smartphones and Portable devices
● PC accessories/peripherals: Multi-Function Monitors, etc.
●## Features
● PC accessories/peripherals: Multi-Function Monitors, etc.
Part 3D Model
