CDCE913PW Datasheet PDF - TI

●The CDCE913PW is a Programmable Clock Synthesizer generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230MHz, using the integrated configurable PLL. The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal. The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance. The device supports non-volatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the SDA/SCL bus, a 2-wire serial interface.

● In-system programmability and EEPROM

● Serial programmable volatile register

● Non-volatile EEPROM to store customer settings

● Free selectable output frequency up to 230MHz

● Low-noise PLL core

● PLL loop filter components integrated

● Flexible clock driver

● Programmable SSC modulation

● 50ps Typical low period jitter

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.