DAC0800LCN Datasheet PDF - TI

●The DAC0800LCN is a 8-bit monolithic high-speed current-output Digital-to-analogue Converter (DAC) features typical settling times of 100ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also features high compliance complementary current outputs to allow differential output voltages of 20Vp-p with simple resistor loads. The reference-to-full-scale current matching of better than ±1 LSB eliminates the need for full-scale trims in most applications, while the nonlinearities of better than ±0.1% over-temperature minimizes system error accumulations. The noise immune inputs will accept a variety of logic levels. The performance and characteristics of the device are essentially unchanged over the ±4.5V to ±18V power supply range and power consumption at only 33mW with ±5V supplies is independent of logic input levels.

● 100ns Fast settling output current

● ±1 LSB Full scale error

● ±0.1% Nonlinearity over-temperature

● ±10ppm/°C Full scale current drift

● Complementary current outputs

● Interface directly with TTL, CMOS, PMOS and others

● 2 Quadrant wide range multiplying capability

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.