●The DRV8711DCP is a stepper motor Gate Driver with on-chip 1/256 micro-stepping indexer and stall detect that uses external N-channel MOSFETs to drive a bipolar stepper motor or two brushed DC motors. A microstepping indexer is integrated, which is capable of step modes from full step to 1/256-step. An ultra-smooth motion profile can be achieved using adaptive blanking time and various current decay modes, including an auto-mixed decay mode. Motor stall is reported with an optional back-EMF output. A simple step/direction or PWM interface allows easy interfacing to controller circuits. A SPI serial interface is used to program the device operation. Output current, step mode, decay mode and stall detection functions are all programmable through a SPI serial interface. Internal shutdown functions are provided for over-current protection, short-circuit protection, under-voltage lockout and over-temperature.
● Pulse width modulation (PWM) microstepping motor driver
● Built-in 1/256-step Microstepping indexer
● Drives external n-channel MOSFETs
● Optional STEP/DIR pins
● Optional PWM control interface for DC motors
● Flexible decay modes, including automatic mixed decay mode
● Stall detection with optional BEMF output
● Highly configurable SPI serial interface
● Internal reference and torque DAC
● Scalable output current
● Over-current Protection (OCP)
● Over-temperature Shutdown (OTS) protection
● Under-voltage lockout (UVLO) protection
● Individual fault condition indication bits
● Fault condition indication pin
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
Part 3D Model
