●The DRV8801-Q1 provides a versatile power driver solution with a full H-bridge driver. The device can drive a brushed DC motor or one winding of a stepper motor, as well as other devices like solenoids. A simple PHASE/ENABLE interface allows easy interfacing to controller circuits
●The output stages use N-channel power MOSFETs configured as ½-H-bridges. The DRV8801-Q1 is capable of peak output currents up to ±2.8 A and operating voltages up to 38 V. An internal charge pump generates needed gate drive voltages.
●A low-power sleep mode is provided which shuts down internal circuitry to achieve very low quiescent current draw. This sleep mode can be set using a dedicated nSLEEP pin.
●Internal protection functions are provided: undervoltage lockout, overcurrent protection, short-to-supply protection, short-to-ground protection, overtemperature warning, and overtemperature shutdown. Overcurrent (including short-to-ground and short-to-supply) and overtemperature fault conditions are indicated via an nFAULT pin.
●The DRV8801-Q1 is packaged in a 16-pin QFN package with exposed thermal pad, providing enhanced thermal dissipation.
●For all available packages, see the orderable addendum at the end of the datasheet.
● Qualified for Automotive Applications
● AEC-Q100 Qualified With The Following Results:
● Device Temperature Grade 1: TA = –40ºC to 125ºC
● Device HBM ESD Classification Level H2
● Device CDM ESD Classification Level C4
● Low RDS(on) Outputs (0.83-Ω HS + LS Typical)
● Low-Power Sleep Mode
● 100% PWM Supported
● 8–38 V Operating Supply Voltage Range
● Thermally Enhanced Surface Mount Package
● Configurable Overcurrent Limit
●Protection Features
● VBB Undervoltage Lockout (UVLO)
● Overcurrent Protection (OCP)
● Short-to-supply Protection
● Short-to-ground Protection
● Overtemperature Warning (OTW)
● Overtemperature Shutdown (OTS)
● Overcurrent and Overtemperature Fault Conditions Indicated on Pins (nFAULT)
●All trademarks are the property of their respective owners.
Part 3D Model
