●The DS90LV019 is a Driver/Receiver designed specifically for the high speed low power point-to-point interconnect applications. The device operates from a single 3.3V or 5.0V power supply and includes one differential line driver and one receiver. The DS90LV019 features an independent driver and receiver with TTL/CMOS compatibility (DIN and ROUT). The logic interface provides maximum flexibility as 4 separate lines are provided (DIN, DE, RE#, and ROUT). The device also features a flow-through pin out which allows easy PCB routing for short stubs between its pins and the connector. The driver has 3.5 mA output loop current.
●The driver translates between TTL levels (single-ended) to Low Voltage Differential Signaling levels. This allows for high speed operation, while consuming minimal power with reduced EMI. In addition, the differential signaling provides common-mode noise rejection.
●The receiver threshold is ±100 mV over a ±1V common-mode range and translates the low swing differential levels to standard (TTL/CMOS) levels.
● LVDS Signaling
● 3.3V or 5.0V operation
● Low power CMOS design
● Balanced Output Impedance
● Glitch free power up/down (Driver disabled)
● High Signaling Rate Capacity (above 100 Mbps)
● Ultra Low Power Dissipation
● ±1V Common-Mode Range
● ±100 mV Receiver Sensitivity
● Product offered in SOIC and TSSOP packages
● Flow-Through Pin Out
● Industrial Temperature Range Operation
●_TRI-STATE® is a registered trademark of National Semiconductor Corporation._
Part 3D Model
