●The FPF2595 advanced load-management switch targets applications requiring a highly integrated solution. It disconnects loads powered from the DC power rail (<6 V) with stringent off-state current targets and high load capacitances (<100 µF). The FPF2595 consists of a slew-rate controlled low-impedance MOSFET switch (35 mΏ typical) and integrated analog features. The slew-rate controlled turn-on characteristic prevents inrush current and the resulting excessive voltage droop on power rails. FPF2595 has over-voltage protection and over-temperature protection. The FPF2595 has a True Reverse-Current Blocking (TRCB) function that obstructs unwanted reverse current from V during ON and OFF states. The exceptionally low off-state current drain (<2 µA maximum) facilitates compliance with standby power requirements. The input voltage range operates from 2.5 V to 5.5 V to support a wide range of applications in consumer, optical, medical, storage, portable, and industrial-device power management. Switch control is managed by a logic input (active HIGH) capable of interfacing directly with low-voltage control signal / General-Purpose Input / Output (GPIO) without an external pull-down resistor. The device is packaged in advanced, fully “green” compliant, 1.3 mm x 1.8 mm, Wafer-Level Chip-Scale Packages (WLCSP).
●Features
●---
● |
● VIN: 2.5 V~5.5 V
● 28 V Absolute Ratings at VOUT
● Current Capability: 3.9 A
● Typ 0.1 A~3.5 A with 10% Accuracy
● RON: Typ. 35 mΩ & Max. 50 mΩ at 5 VIN and 1 A IOUT
● Output OVP: Min.=5.6 V, Typ.=5.8 V, Max.=6 V
● No Output Discharge During Off State
● Open-Drain OCP on FLAGB
● Thermal Shutdown
● Under-Voltage Lockout (UVLO)
● True Reverse-Current Blocking (TRCB)
● Logic CMOS IO Meets JESD76 Standard for GPIO Interface and Related Power Supply Requirements
● ESD Protected:
● Human Body Model: >2 kV
● IEC 61000-4-2 Air Discharge: >15 kV
● Charged Device Model: >1.0 kV
● IEC 61000-4-2 Contact Discharge: >8 kV
Part 3D Model
