FT2232D-REEL Datasheet PDF - FTDI Chip

● Single chip USB to dual channel serial/parallel ports with a variety of configurations

● Entire USB protocol handled on the chip. No USB specific firmware programming required

● Transfer Data Rate 300 to 3Mbaud

● USB to parallel FIFO transfer data rate up to 1 megabyte/second

● Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol design

● CPU style FIFO interface mode simplifies CPU interface design

● FTDIs Virtual Com Port and Direct drivers eliminate requirement for USB driver development

● Highly integrated design includes 3.3V LDO regulator for USB I/O

● Integrated POR function and on chip clock multiplier PLL (6MHz-48MHz)

● Asynchronous serial UART interface option with full hardware handshaking and modem interface signals

● Enhanced bit-bang Mode interface option with RD# and WR# strobes

● Configurable I/O drive strength

● Fully assisted hardware or X-On/X-Off software handshaking

● UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity

● Configuration mode and USB Description strings configurable in external EEPROM over USB interface

● Supports bus powered, self powered and high power bus powered USB configurations

● Low operating and USB suspend current

● UHCI/OHCI/EHCI host controller compatible

● USB 2.0 Full Speed (12Mbits/Second) compatible