FT2232HL-R Datasheet PDF - FTDI Chip

● Single chip USB to dual serial/parallel ports with a variety of configurations

● Entire USB protocol handled on the chip. No USB specific firmware programming required

● USB 2.0 high speed (480Mbits/Second) and full speed (12Mbits/Second) compatible

● Dual multi protocol synchronous serial engine (MPSSE) to simplify synchronous serial protocol design

● Independent Baud rate generators

● USB to parallel FIFO transfer data rate up to 8 Mbyte/Sec

● Single channel synchronous FIFO mode for transfers upto 40 Mbytes/Sec

● CPU style FIFO interface mode simplifies CPU interface design

● MCU host bus emulation mode configuration option

● Fast opto-isolated serial interface option

● FTDIs Virtual Com Port and direct drivers eliminate the requirement for USB driver development

● Adjustable receive buffer timeout

● Option for transmit and receive LED drive signals on each channel

● Enhanced bit-bang Mode interface option with RD# and WR# strobes

● FT245B style FIFO interface option with bi-directional data bus & simple 4 wire handshake interface

● Highly integrated design includes +1.8V LDO regulator for VCORE

● Integrated POR function and on chip clock multiplier PLL (12MHz-480MHz)

● Asynchronous serial UART interface option with full hardware handshaking and modem interface signals

● Fully assisted hardware or X-On / X-Off software handshaking

● UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity