HCF4541BEY Datasheet PDF - ST Microelectronics

●DESCRIPTION

●The HCC/HCF4541B Programmable Timer is composed of a 16-stage binary counter, an oscillator controlled by2 external resistorsand a capacitor, an output control logic and an automatic power-on reset circuit. The counter varies on positive-edge clock transation and it can be cleared by the MASTER RESET input. The output from this timer is the Q or Q output from the 8th, 13th, or 16th counter stage. The choice of the stage depends on the time select inputs A or B (see frequency selection table).

●■ 16 STAGE BINARI COUNTER

●■ LOW SYMMETRICAL OUTPUT RESISTANCE, TYPICALLY 100 OHM AT VDD = 15V

●■ OSCILLATOR FREQUENCY RANGE : DC TO 100kHz

●■ AUTO OR MASTER RESET DISABLES OSCILLATOR DURING RESET TO REDUCE POWER DISSIPATION

●■ OPERATES WITH VERY SLOW CLOCK RISE AND FALL TIMES

●■ BUILT-IN LOW-POWER RC OSCILLATOR

●■ EXTERNAL CLOCK (applied to pin 3) CAN BE USED INSTEAD OF OSCILLATOR

●■ OPERATES AS 2N FREQUENCY DIVIDER OR AS A SINGLE-TRANSITION TIMER

●■ Q/Q SELECT PROVIDES OUTPUT LOGIC LEVEL FLEXIBILITY CAPABLE OF DRIVING SIX LOW POWER TTL LOADS, THREE LOW-POWER SCHOTTKY LOADS, PR SIX HTL LOADS OVER THE RATED TEMPERATURE RANGE

●■ SYMMETRICAL OUTPUT CHARACTERISTICS

●■ 100% TESTED FOR QUIESCENT CURRENT AT 20V

●■ 5-10-15V PARAMETRIC RATINGS

●■ MEETS ALL REQUIREMENTS OF JEDECTEN TATIVE STANDARD N 13A, ”STANDARD SPE CIFICATIONS FOR DESCRIPTION OF ’ B ’ SERIES CMOS DEVICES”