●This high gain optocoupler series uses a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high speed operation. Where desired VCC and VO terminals may be tied together to achieve convention photodarlington operation.A base access terminal allows a gain bandwidth adjustment to be made.
●The HCNW139 is for use in CMOS, LSTTL, or other low power application. A 400% minimum current transfer ratio is guaranteed over 0 to 70 degrees C operating range for only 0.5 mA of LED current.
●Selection for lower input current down to 250 mA is available upon request.
●The HCNW139 is packaged in a widebody encapsulation that provides creepage and clearance dimensions suitable for safety approval by regulatory agencies worldwide.
●### Features
● High Current Transfer Ratio - 4500% Typical
● Low Input Current Requirements - 0.5 mA
● TTL Compatible Output - 0.1V VOL Typical
● Performance Guaranteed over Temperature 0 degrees C to 70 degrees C
● Base Access Allows Gain Bandwidth Adjustment
● High Output Current - 60 mA
● Safety Approval:
●UL Recognized - 2500 V rms for 1 minute and 5000 V rms for 1 minute per UL 1577
●CSA Approved
●IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 1414 V peak
● Available in 8-Pin DIP or SOIC-8 Footprint or Widebody Package
● Options available are:
●300 = Gull Wing Surface Mount Option
●500 = Tape and Reel Packaging Option
●XXXE = Lead Free Option
Part 3D Model
