HCNW2211 Datasheet PDF - Broadcom

●The HCNW2211 optocoupler is an optically-coupled logic gate. It contains an AlGaAs LED. The detectors have totem pole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic-compatible waveforms, illuminating the need for additional waveshaping.

●A superior internal shield on the HCNW2211 guarantees common mode transient immunity of 10 kV/ms at a common mode voltage of 1000 volts.

●The electrical and switching characteristics of the HCNW2211 is guaranteed from -40 degrees C to 85 degrees C and a VCC from 4.5 volts to 20 volts. Low IF and wide VCC range allows compatibility with TTL, LSTTL, and CMOS logic and result in lower power consumption compared to other high speed couplers. Logic signals are transmitted with a typical propagation delay of 150 ns.

●### Features

● 10 kV/ms Minimum Common Mode Rejection (CMR) at VCM = 1000 V

● Wide Operating VCC Range: 4.5 to 20 Volts

● 300 ns Propagation Delay Guaranteed over the Full Temperature Range

● 5 Mbd Typical Signal Rate

● Low Input Current (1.6 mA to 1.8 mA)

● Hysteresis

● Totem Pole Output (No Pullup Resistor Required)

● Available in 8-Pin DIP, SOIC-8, Widebody Packages

● Guaranteed Performance from -40 degrees C to 85 degrees C

● Safety Approval:

●UL Recognized - 5000 V rms for 1 minute per UL1577

●CSA Approved

●IEC/EN/DIN EN 60747-5-2 Approved with VIORM = 1414 V peak

● Options available are:

●300 = Gull Wing Surface Mount Option

●500 = Tape and Reel Packaging Option

●XXXE = Lead Free Option